Posts: 31905
Threads: 205
Joined: July 19, 2011
Reputation:
141
RE: Installing GCC 13.1.0
May 1, 2023 at 9:18 pm
(May 1, 2023 at 7:18 pm)FlatAssembler Wrote: I've just noticed that my 32-bit Debian virtual machine doesn't boot after I've updated VirtualBox to the version 7.0.6. I get the following error:
![[Image: 7Z5L5.png]](https://i.stack.imgur.com/7Z5L5.png)
I've tried to re-install Debian from CD, but the installer also crashes with the same error message. What should I do?
Undo the thing that you did before it broke (back out your VirtualBox update).
In anticipation of your next question, if you want to know how to fix the kernel panic your OS vendor ando virtualization provider are over there. ---->
If it were me, I'd start by reading VirtualBox release notes for the new version and every version you skipped and see if anything of use is in them. If not, go back to my first suggestion.
Posts: 3897
Threads: 31
Joined: August 9, 2015
Reputation:
27
RE: Installing GCC 13.1.0
May 2, 2023 at 1:39 am
This feels like a good time to relate a little of my life story to you FA.
When I went to college it was because I wanted to be the first in my immediate family to do so.
So I picked psychology because how the human brain works fascinates me. Now some areas I did very well like 'interpersonal communication' but in others like ' Statistics' I was terrible. I knew right then I had hit my limit and I was ok with that, It Didn't hurt to try.
The point here is if I had wasted time pursuing it I may never have found the job I do now, Which I really enjoy. I'm not telling you to give up but instead, maybe refocus your drive elsewhere so you can flourish.
"For the only way to eternal glory is a life lived in service of our Lord, FSM; Verily it is FSM who is the perfect being the name higher than all names, king of all kings and will bestow upon us all, one day, The great reclaiming" -The Prophet Boiardi-
Conservative trigger warning.
![[Image: s-l640.jpg]](https://i.ebayimg.com/images/g/DjAAAOSwpIhe1HCM/s-l640.jpg) ![[Image: shopping?q=tbn:ANd9GcSBjdQ4tzp0y16OBYXxG...s&usqp=CAc]](https://encrypted-tbn2.gstatic.com/shopping?q=tbn:ANd9GcSBjdQ4tzp0y16OBYXxGHviuSEP1CY720s_6mHNAXBFKPTJmQ5aKe6O8np5DxULdG09YGTD5gaa-AmAZuKC8tFkJZJwfZQh38GsDXHmOwRvY6_Dp1nimsGi2cjo6jvSieJS1rNJHHxOdLs&usqp=CAc)
Posts: 2020
Threads: 133
Joined: July 26, 2017
Reputation:
5
RE: Installing GCC 13.1.0
May 2, 2023 at 10:48 am
(May 1, 2023 at 9:53 am)HappySkeptic Wrote: It tells you the problem:
"recompile with -fPIC"
Google what that means. I've always used it in my UNIX or LINUX compiles. It doesn't make sense not to use it. I've tried to do the following before running `configure`:
Code: # Downgrade GCC to the one that comes with Debian.
export CC=/usr/bin/gcc
export CXX=/usr/bin/g++
# Tell "configure" to always add "-fPIC" when invoking GCC
export CFLAGS="-fPIC"
export CXXFLAGS=$CFLAGS
I still get exactly the same error. And I think I understand why:
1. The error occurs at the Stage 2 of the compilation of GCC. That means the GCC being invoked isn't the GCC you have already installed on your system, but the newly-built GCC 13.1. It's the `xgcc`, the minimal GCC used to compile the rest of GCC. It shouldn't matter which version of GCC was used to produce `xgcc` in the Stage 1 (unless you assume there is some weird wrong-code bug).
2. Take a look at the invocation that occurs right before the error:
Code: libtool: link: /home/teo/gcc-objdir/./gcc/xgcc -shared-libgcc -B/home/teo/gcc-objdir/./gcc -nostdinc++ -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/src -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -B/usr/local/x86_64-pc-linux-gnu/bin/ -B/usr/local/x86_64-pc-linux-gnu/lib/ -isystem /usr/local/x86_64-pc-linux-gnu/include -isystem /usr/local/x86_64-pc-linux-gnu/sys-include -fPIC -DPIC -shared -nostdlib /usr/lib/x86_64-linux-gnu/crti.o /home/teo/gcc-objdir/./gcc/crtbeginS.o .libs/hwasan_allocation_functions.o .libs/hwasan_allocator.o .libs/hwasan.o .libs/hwasan_dynamic_shadow.o .libs/hwasan_exceptions.o .libs/hwasan_fuchsia.o .libs/hwasan_globals.o .libs/hwasan_interceptors.o .libs/hwasan_interceptors_vfork.o .libs/hwasan_linux.o .libs/hwasan_memintrinsics.o .libs/hwasan_new_delete.o .libs/hwasan_poisoning.o .libs/hwasan_report.o .libs/hwasan_setjmp_aarch64.o .libs/hwasan_setjmp_x86_64.o .libs/hwasan_tag_mismatch_aarch64.o .libs/hwasan_thread.o .libs/hwasan_thread_list.o .libs/hwasan_type_test.o -Wl,--whole-archive ../sanitizer_common/.libs/libsanitizer_common.a ../interception/.libs/libinterception.a ../libbacktrace/.libs/libsanitizer_libbacktrace.a -Wl,--no-whole-archive -Wl,-rpath -Wl,/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -Wl,-rpath -Wl,/usr/local/lib/../lib64 -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/src -L/home/teo/gcc-objdir/x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -ldl -lrt -lpthread ../../libstdc++-v3/src/.libs/libstdc++.so -lm -L/home/teo/gcc-objdir/./gcc -L/lib/x86_64-linux-gnu -L/lib/../lib64 -L/usr/lib/x86_64-linux-gnu -lc -lgcc_s /home/teo/gcc-objdir/./gcc/crtendS.o /usr/lib/x86_64-linux-gnu/crtn.o -mshstk -Wl,-soname -Wl,libhwasan.so.0 -o .libs/libhwasan.so.0.0.0
/usr/bin/ld: .libs/hwasan.o: relocation R_X86_64_PC32 against undefined symbol `__ehdr_start' can not be used when making a shared object; recompile with -fPIC
The GNU Make does pass the `-fPIC` to the `xgcc`, it's just apparently being ignored.
Posts: 1718
Threads: 5
Joined: September 26, 2018
Reputation:
13
RE: Installing GCC 13.1.0
May 2, 2023 at 1:01 pm
-fPIC must be invoked on creation of the .o files (i.e. hwasan.o) , not just at the link stage.
Posts: 2020
Threads: 133
Joined: July 26, 2017
Reputation:
5
RE: Installing GCC 13.1.0
May 2, 2023 at 2:40 pm
Posts: 2020
Threads: 133
Joined: July 26, 2017
Reputation:
5
RE: Installing GCC 13.1.0
May 2, 2023 at 3:53 pm
Just managed to install GCC 13.1.0 on CygWin, but I cannot reproduce the error that GitLab claims occurs when compiling my compiler.
Posts: 18701
Threads: 156
Joined: July 10, 2013
Reputation:
65
RE: Installing GCC 13.1.0
May 2, 2023 at 3:53 pm
Wow, thanks for the update!
What fresh hell can this be? - Dorothy Parker
Posts: 2020
Threads: 133
Joined: July 26, 2017
Reputation:
5
RE: Installing GCC 13.1.0
May 2, 2023 at 4:07 pm
(May 2, 2023 at 1:39 am)Nay_Sayer Wrote: This feels like a good time to relate a little of my life story to you FA.
When I went to college it was because I wanted to be the first in my immediate family to do so.
So I picked psychology because how the human brain works fascinates me. Now some areas I did very well like 'interpersonal communication' but in others like ' Statistics' I was terrible. I knew right then I had hit my limit and I was ok with that, It Didn't hurt to try.
The point here is if I had wasted time pursuing it I may never have found the job I do now, Which I really enjoy. I'm not telling you to give up but instead, maybe refocus your drive elsewhere so you can flourish.
Then both of us were killed by mathematics, right? You were killed by the statistics, while I was killed by Signals and Systems and its successor Control Engineering.
I am refocusing my drive elsewhere. I am publishing papers about the names of places.
Posts: 52652
Threads: 567
Joined: July 24, 2013
Reputation:
109
RE: Installing GCC 13.1.0
May 2, 2023 at 4:48 pm
(May 2, 2023 at 4:07 pm)FlatAssembler Wrote: (May 2, 2023 at 1:39 am)Nay_Sayer Wrote: This feels like a good time to relate a little of my life story to you FA.
When I went to college it was because I wanted to be the first in my immediate family to do so.
So I picked psychology because how the human brain works fascinates me. Now some areas I did very well like 'interpersonal communication' but in others like ' Statistics' I was terrible. I knew right then I had hit my limit and I was ok with that, It Didn't hurt to try.
The point here is if I had wasted time pursuing it I may never have found the job I do now, Which I really enjoy. I'm not telling you to give up but instead, maybe refocus your drive elsewhere so you can flourish.
Then both of us were killed by mathematics, right? You were killed by the statistics, while I was killed by Signals and Systems and its successor Control Engineering.
I am refocusing my drive elsewhere. I am publishing papers about the names of places.
You should do Muckanaghederdauhaulia next.
Boru
‘I can’t be having with this.’ - Esmeralda Weatherwax
Posts: 2020
Threads: 133
Joined: July 26, 2017
Reputation:
5
RE: Installing GCC 13.1.0
May 2, 2023 at 6:00 pm
(May 2, 2023 at 4:48 pm)BrianSoddingBoru4 Wrote: (May 2, 2023 at 4:07 pm)FlatAssembler Wrote: Then both of us were killed by mathematics, right? You were killed by the statistics, while I was killed by Signals and Systems and its successor Control Engineering.
I am refocusing my drive elsewhere. I am publishing papers about the names of places.
You should do Muckanaghederdauhaulia next.
Boru
Which journal in Croatia do you think would publish a paper about an Irish placename? Especially a morphologically transparent one, as, ccording to Wikepedia, it means "pig-marsh between two sea inlets". I have no idea what to write about it.
|
