Catholics vs. Evangelicals?

[vorlon13]

03-033/01-09
(Rip Rap) 02272-1
SECTION 02272
RIP RAP
PART 1        GENERAL
1.01    SCOPE OF WORK
This section pertains to the use of riprap for the
protection of rivers, creeks and ditches from
the effects of erosion and scouring.  The work requ
ired consists of all materials, accessories,
equipment, tools and labor required to install ripr
ap.
1.02    REFERENCES
A.      Manual  for  Erosion  and  Sediment  Control in Georg
ia (SCS Manual published by the
State Soil and Water Conservation Committee of Geor
gia (latest edition).  
B.      Georgia Department of Transportation Standard Sp
ecifications, Construction of Roads
and Bridges (latest edition).
PART 2        PRODUCTS
2.01    RIP RAP
All  stone  for  rip  rap  shall  conform  to  the  followin
g  tables  for  the  type  specified  on  the
drawings as recommended by the Georgia DOT Standard
Specifications, Section 603:
TABLE NO. 1
GRADED RIP RAP STONE
Type
Ga. D.O.T.
Screen Size inches (Sq. opening)
Common
Uses
Filter   Stone
ASTM     D-
448
Max.         Avg.          Min.
3             12           9             5          Creek Banks Pipe
Outlets
6 or 57
1             24           12            7               Lakes &
Shorelines, Rivers
3, 4 or 5
03-033/01-09
(Rip Rap) 02272-2
2.02    FILTER BEDDING STONE
Materials used for filter bed stone shall conform t
o the following table as recommended by the
Georgia DOT Standard Specifications, Section 603:
FILTER BEDDING STONE
ASTM D-448  
TABLE 1
Normal Sizes  
(inches)
3                                2" - 1"
4                             1 1/2"-3/4"
5                               1" - 1/2"
6                              3/4"-3/8"
57                             1" - No. 4
2.03    GEO-TECHNICAL FILTER FABRIC
A.      As  an  alternate  to  filter  bedding  stone,  the  DEV
ELOPER/CONTRACTOR  may  use
geo-technical filter fabric.
B.      Filter fabric shall have strength and engineerin
g properties that meet or exceed those of
MIRAFI  700X  or  PROPEX  1199,  or  equivalent.    Filter
fabric  shall  be  as
recommended by the Georgia DOT Standard Specificati
ons, Section 171.
2.04    LOCALLY EXCAVATED ROCK
Rock excavated from the site may be used for work d
escribed under this section, provided that
the quality and size requirements meet the requirem
ents of Articles 2.01 and 2.02.
2.05    MATERIAL AVAILABILITY  
The  gradations  of  stone  sizes  listed  in  these  table
s  are  guidelines.    Individual  quarries  may
produce  different  gradations  depending  on  local  con
ditions.    If  gradations  are  different  from
those  listed,  DEVELOPER/CONTRACTOR  is  to  notify  the
 TOWN  OF  BRASELTON  for
approval prior to use on the project.
PART 3        EXECUTION
3.01    STONE OR CONCRETE RIP RAP
A.      Prepare  area  to  receive  rip  rap.    Ensure  area  is
 sufficiently  stable  and  compacted  to
receive the stone.
B.      Install  either  filter  stone  to  thickness  specifi
ed  on  drawings,  or  geo-technical  filter
fabric per manufacturer's recommendations.