How about this..

[Deesse23]

As far as energy now with things we have at hand.. Free nuclear power available to anyone anywhere in the world can be found just 7.5 miles down.
The deepest hole in the world is 7.5 mile down it is in russia. this hole was stopped at 7.5 miles because the water to cool the tools would flash before it got to the tool heads. meaning if we piped down water we could bring back up crazy high steam pressure. high enough to turn turbines and make conventional electricity..

So in a sense old sport... there is your perpetual motion machine. Just make it a closed loop system. Pump in cold water from a seal reservoir, down 7.5 miles have the water flash to steam allow the vapor to come back up as high pressure gas, run it through a turbine ,then a condenser then back to the radiator, and repeat.

No fuel used the turbine will spin till the steam washes away the stainless steel blades 100k years from now. the wate get pumped in as liquid turn to steam which forces it self out to the turbine via pipes runs through the turbine is recaptured by pipe system to a condenser making the water liquid again returns to a reservoir waiting to be used again. if the system is sealed then you will never need to refill the water nor need fuel to make the steam.

Let's review what you were claiming Drich. Admittedly you did say "So in a sense" ... but even being this generous, absolutely everything  else was wrong.

You claimed it would last until the components wore out 100K years from now.

You claimed it provides free nuclear power.

You claimed it did not use fuel.

Plus the hilarious claim about tear and wear.

Ill tell you what happened:
until ca. #134 he believed a perpetual motion machine just needs to "run forever", and i bet he thought geothermal energy would be the solution, because, it will last so long, almost forever. . He didn tknow that being fueled forom the outside disqualifies his machine from being a perpetual motion machine, and he didnt realize that forever is literally for-fucking-ever. He didnt (and still doesnt) know shit about thermal thermodynamics. Hence his hysterical post:

come on boring you... You know I am not subject to your personal definitions... In the REAL definition of a perpetual motion machine the energy does 'have to go back into the hole.) That is you trying to move the goal posts so you do not have to admit that I literally came up with an example of a machine that will never stop working with no addition of fuel or material loss out side of wear and tear. Don't look now but that is the literal definition, and not your personal take.

per·pet·u·al mo·tion
/pərˈpeCH(əw)əl ˈmōSHən/
noun

1. a state in which movement or action is or appears to be continuous and unceasing.
   "the planet is in perpetual motion"
   
   • the motion of a hypothetical machine which, once activated, would run forever unless subject to an external force or to wear.
     "the age-old quest for the secret of perpetual motion"
     
     
     

do you see the second definition? 

This is me in a 2 min window providing you and the rest of the world with a machine that would technically run forever.

Until #153, he definitely (still) believed that wear and tear are excluded in the energy balance, yet wear and tear is the main problem for any (real) attempt of a (real) perpetual motion machine (not the bullshit-normal-machine being externally fueled like the engine of my car, which also has been explained ot him multiple times). Any machine with wear and tear can not, fundamentally not, be a perpetual motion machine (like any maching being fueled from the outside of the boundaries of its closed system). It definitely has escaped him until #153

and i do not think you understand the definition of perpetual motion machine.. even after I posted it.

wear and tear would consume the machine before the radiation of the core would stop producing enough heat to cause a fuel failure.

Meaning core fails with in 10 years all life ends, yet the machine will continue on till the bearing fails, or a pipe develops a leak or a rubber oring cracks and fails or 1000 other wear and tear things happens... which again is included in the defination.

Meaning the definition of perpetual motion machine makes allowances for wear and tear. which again will hapen long long before the machine runs out of fuel/heat.

He is an idiot with delusions of grandeur. He is making up shit as he goes along and thinks we are just as stupid and wont notice. Well, i got bad news for him.....