Posts: 2886
Threads: 132
Joined: May 8, 2011
Reputation:
31
Networking Guru Needed
October 8, 2021 at 9:35 pm
We have an office that supports multiple companies. I want to run a separate WAN connection off the router to each company. Each company has multiple VLANs with each VLAN being accessed from the Internet via a unique IP. For example, the HQ LAN will have 6 VLANs across multip switches so 6 WAN IP's with a single physical connection to the router. Any reason why this won't work?
Pictures...
Save a life. Adopt a greyhound.
Posts: 7259
Threads: 506
Joined: December 12, 2015
Reputation:
22
RE: Networking Guru Needed
October 8, 2021 at 10:48 pm
If you can diagram it, then, yes, it is possible!
Posts: 29870
Threads: 116
Joined: February 22, 2011
Reputation:
159
RE: Networking Guru Needed
October 9, 2021 at 1:11 am
Posts: 2872
Threads: 8
Joined: October 4, 2017
Reputation:
22
RE: Networking Guru Needed
October 9, 2021 at 10:14 am
(October 8, 2021 at 10:48 pm)Jehanne Wrote: If you can diagram it, then, yes, it is possible!
At first blush, sure it is workable. But there is an obvious bottleneck. If one is not hurling large files about the place, that might be acceptable. If the traffic is high, nope.
Posts: 2886
Threads: 132
Joined: May 8, 2011
Reputation:
31
RE: Networking Guru Needed
October 9, 2021 at 12:47 pm
(October 9, 2021 at 10:14 am)Abaddon_ire Wrote: (October 8, 2021 at 10:48 pm)Jehanne Wrote: If you can diagram it, then, yes, it is possible!
At first blush, sure it is workable. But there is an obvious bottleneck. If one is not hurling large files about the place, that might be acceptable. If the traffic is high, nope.
Explain, please. The 10 gig SFP link between the switches? Most of the LAN traffic should be limited to a single switch. Users mostly accessing data on the user vlan, backups happening on the server vlan, IDS and logging functions on the management vlan, etc.
The original plan was to feed each VLAN with its own port off the router, but I was planning on using a single server to monitor multiple ports. Turns out that each IDS sensor port is going to require at least 12 cores and 128 BG of ram for every Gbps of data to keep the sensors from dropping packets. I ran out of hardware to support that many ports. I'm using older hardware for the sensors so it isn't terribly expensive, but I'm rapidly running out of power. A Dell R710 pulls a lot of watts when you are running the shit out of the processors, memory, and drives at the same time.
Save a life. Adopt a greyhound.
Posts: 7259
Threads: 506
Joined: December 12, 2015
Reputation:
22
RE: Networking Guru Needed
October 9, 2021 at 2:53 pm
(October 9, 2021 at 10:14 am)Abaddon_ire Wrote: (October 8, 2021 at 10:48 pm)Jehanne Wrote: If you can diagram it, then, yes, it is possible!
At first blush, sure it is workable. But there is an obvious bottleneck. If one is not hurling large files about the place, that might be acceptable. If the traffic is high, nope.
That's true, everywhere, of course, hence, CDNs, caching, etc. I have worked in IT for 30 years and remember the days back in the 80s where US West offered a service of live, on-demand video streaming: The customer would call in to request a movie, and a technician would go get the VHS tape, place it in a video player, and configured that player to stream the movie to the customer's TV.
|