Women's clothes?

[abaris]

I think, OP might be some testing ground for the new forum rule. Why do you still fall for his shit and run routine?

[Cato]

@OP

Referencing your link in the OP, the Doctor Who episode The Waters of Mars taught me it was bad to go near people that shot water from their hands.

[Clueless Morgan]

I think, OP might be some testing ground for the new forum rule. Why do you still fall for his shit and run routine?

The nuclear option? Hardly. This maybe be an example of a shit and run but it's more in the realm of pellet turds - easy to clean up - not exploding diarrhea.

[Minimalist]

[account_inactive]

Why are they so skimpy these days? Is it proof that global warming is happening?

Some may dress skimpily but most dress very modestly and however they dress is none of your business. We're all allowed to dress however the fuck we want.

Or is it just a shift in our values, that unlike in olden days, society favors women who "bare it all" before a good and wholesome marriage?

People got smarter and don't always abide by bullshit religious laws.

I do fear the role models women have. Why is it that Taylor Swift, Lena Dunham and Miley Cyrus are models for todays ladies?

I agree that Miley Cyrus isn't exactly the best role model for girls but cannot comment on the other two.

Why is this woman not a female role model or really revered at all anymore?  http://www.catholictradition.org/Litanies/litany37.jpg

Because not everyone is a brainwashed Christian who is obsessed with this woman. And eww, who the hell wants to wear that? Looks absolutely awful.

[bennyboy]

I think, OP might be some testing ground for the new forum rule. Why do you still fall for his shit and run routine?

What's the problem?

[houseofcantor]

And here I thought this was a confession thread. :/

[Alex K]

The 5256T Impact Crusher is a track-mounted crusher designed to crush quarry rock or recyclable materials such as concrete and asphalt. The 5256T Portable Impact Crusher is loaded with great features such as standard heavy-duty tracks and a Caterpillar® C-15 475 HP (354.2.2 kw) diesel engine, 52" (1.3m) x 56" (1.4m) horizontal impact crusher, 56" (1.4m) x 38" (.9m) feed inlet opening, fully remote controlled operation.

Other key features include a unique, patented wireless remote control lifting lid allowing over sized material to pass through the crusher without stoppage. Countless hours of production downtime can be saved with this single unique feature, standard only on Screen Machine Industries' Impact Crushers. The sophisticated design of the 5256T Impact Crusher generates high production with low maintenance costs.



The JHT Jaw Crusher being based on the JXT Jaw Crusher model, is a track-mounted crusher featuring remote control jaw adjustment. Operated by wireless remote control, the JHT can process your hardest and most difficult materials, greatly reducing the typical risk of stoppages, damages and high maintenance costs associated with most other jaw crushers. This powerful high capacity plant will crush your competition.
Features Overview:

Crusher
True 26" (66cm) x 45" (1.14m) Wide Inlet Opening
Remote Control Hydraulic Jaw Adjustment
Engine & Controls
C-9 Tier III Caterpillar® 300 HP (225 kw) Engine
Cattron® Wireless Remote Control Operation
Hopper / Feeder
40" x 13'-0" (1M x 4M) Wide Long Vibratory Grizzly Feeder
14'-0" (4.3M) Long Feed Hopper Opening
Conveyors
42" (1.07m) Main Belt
10'-9" (3.28m) Discharge Height
24" (.6m) Fines Side Conveyor
7'-0" (2.1m) Discharge Height
Unique Features
Fully Adjustable Cross-Belt Magnet With Stainless Steel Chutes
Structure / Undercarriage
Grade 80 Steel Construction
Heavy-Duty Tracked Undercarriage

---

ODOT spec for gravel road installation.  
It can be found online here:
http://www.dot.state.oh.us/Divisions/Constructi
onMgt/Specifications/2008CMS/300/304.htm#a_
304_04
ITEM 304 AGGREGATE BASE
304.01 Description
304.02 Materials
304.03 Prior to Spreading
304.04 Spreading
304.05 Compaction
304.06 Finished Surface
304.07 Method of Measurement
304.08 Basis of Payment
304.01 Description
.
This work consists of furnishing, placing,
and compacting one or more courses of
aggregate, including furnishing and incorporating all
water required for compacting, on a prepared surface.
304.02 Materials.
Furnish materials conforming to
703.17
.
304.03 Prior to Spreading.
The Engineer will sample the Contractor’s stockpile to determine the initial
moisture content to be used for compaction. The Engineer will develop a moisture-density curve according to
Supplement 1015.
Use material that is reasonably uniform with moisture
. Use a moisture content not less than -2 percent of
optimum moisture prior to spreading. Add water to the stockpiles to meet this moisture requirement. Handle the
material in a manner to minimize segregation. If segregation occurs, thoroughly mix or regrade the stockpile.
304.04 Spreading.
Spread the material on the prepared surface. Do not spread on frozen material. Do not
use graders or dozers without spreader boxes to spread the material except as outlined below.
Spread the material such that it minimizes segregation and requires minimal blading or manipulation. The
Department may perform in place gradation testing in areas that are visually segregated according to
Supplement
1090
.
The Contractor may use hand-placing methods, dozers or
graders when the total area of the material is 2000
square yards (1700 m2) or less or in small areas where
self propelled spreading machines are impractical. Small
areas include lane widths less than 12 feet (3.7 m)
or lengths less than 1000 feet (305 m). Do not exceed a
compacted lift thickness of 6 inches (200 mm) when using 10 to 12-ton (9 to 11 metric tons) vibratory rollers.
Do not exceed a maximum compacted lift thickness of 4 inches (100 mm) when these vibratory rollers are not
used.
The Contractor may elect to use a lighter roller if
the centrifugal force exceeds the minimum weight. In all
cases, submit documentation proving the minimum weight requirements are met.
Place the material in two or more approximately equal lifts when the specified compacted thickness exceeds 8
inches (200 mm).
Place the material with self-propelled spreading machines capable of placing the material true to line and
grade. Spreading machines such as spreader boxes or
pavers are allowed. The Contractor may use dozers
without spreader boxes or graders, but the Department will take in place gradation tests according to
Supplement
1090
.
The Contractor may use hand-placing methods when the total area of the material is 2000 square yards (1700
m
2
) or less, or in small areas where machine spreading is impractical. The Department will not take in place
gradation tests in these small areas.
The Department may test for in place gradation after spreading but before compaction testing according to
Supplement 1090.
304.05 Compaction.
The Department will measure the compaction according to
Supplement 1015
.
Add water to the material or dry the material to bring it
to within +/- 2 percent of optimum moisture prior to
the compaction operation. Maintain this moisture range during all compaction operations. The Engineer will
determine the percentage of moisture to apply or to be
dried from the material. Uniformly apply the water or dry
the material throughout the lift and in a manner that does not soften or disturb the lower courses. Reduce the
moisture content if the material becomes unstable during the compaction operations.
Compact each lift of material immediately after the spreading operations. Depending on the lift thickness
used, use vibratory rollers with a minimum weight or centr
ifugal force of 10 or 12 tons (9 to 11 metric tons).
The Contractor may use light rollers or vibratory equipment in small areas
as specified in
304.04

---

[Alex K]

Ha Funny you should use the Ohio DOT. I have this exact spec book.

That's uncanny

[BrianSoddingBoru4]

Mary (mother of Jesus) only dressed that way because she was heavily tatted up, include the one on her left tit that read 'Born To Not Fuck'.

Mary Magdalene, on the other hand, routinely wore the Slutty Nurse Outfit, made of finest pleather.

Boru