Posts: 46046
Threads: 538
Joined: July 24, 2013
Reputation:
109
Metal Working
October 5, 2020 at 6:58 am
Lately, I’ve been giving serious thought to getting into metalwork as a hobby, nothing commercial. I’m in the process of winding down the luthier business with a view to retirement, and will need something to occupy my time.
I’ve done some research - tools, equipment, techniques, that sort of thing - and it seems interesting and challenging enough to suit me.
So...if we have any experienced metalworkers here, your advice/tips/tricks would be greatly appreciated.
Boru
‘I can’t be having with this.’ - Esmeralda Weatherwax
Posts: 9538
Threads: 410
Joined: October 3, 2018
Reputation:
17
RE: Metal Working
October 5, 2020 at 8:19 am
(This post was last modified: October 5, 2020 at 8:20 am by onlinebiker.)
Whatcha want to know?
In my shop I have a 12 inch engine lathe, a horizontal milling machine, a toolroom surface grinder, a floor mount drill press, a 30 ton hydraulic press, MIG, TIG, and acytelene welding - and a lifetime's collection of hand tools and measuring devices.
I worked as a prototype and one-off production machinist before retiring.
Posts: 46046
Threads: 538
Joined: July 24, 2013
Reputation:
109
RE: Metal Working
October 5, 2020 at 9:34 am
More involved than what I have in mind. I’m not looking to become a machinist, thinking more along the lines of casting, carving, light forging, etc.
Boru
‘I can’t be having with this.’ - Esmeralda Weatherwax
Posts: 9538
Threads: 410
Joined: October 3, 2018
Reputation:
17
RE: Metal Working
October 5, 2020 at 9:47 am
Only thing I cast is ingots and bullets.
I cast the ingots out of bullets I clean out of my backstop. Then I cast the bullets out of the ingots.
Lather, rinse, repeat.....
Casting lead requires a fair bit of btu's. Aluminum or brass are far more - and iron is big time...
What would you use for a heat source?
I use coal for ingots and electric for bullets...
Posts: 19881
Threads: 324
Joined: July 31, 2016
Reputation:
34
RE: Metal Working
October 5, 2020 at 9:47 am
It's easy to spot a metal worker. They can only count to nine, at best.
Posts: 9855
Threads: 21
Joined: September 8, 2015
Reputation:
79
RE: Metal Working
October 5, 2020 at 10:49 am
(This post was last modified: October 5, 2020 at 10:50 am by Fireball.)
Boru, you might look into copper smithing. Copper is a lot easier to work that steel. I've made a few copper items.
If you think that you might want to carve, have you considered wood? You already have some of the tools you would need.
If you get to thinking you’re a person of some influence, try ordering somebody else’s dog around.
Posts: 19881
Threads: 324
Joined: July 31, 2016
Reputation:
34
RE: Metal Working
October 5, 2020 at 10:50 am
OR if you want angry burns on your person that make great conversation starters how about jewelry making, silversmithing and the like.
Posts: 46046
Threads: 538
Joined: July 24, 2013
Reputation:
109
RE: Metal Working
October 5, 2020 at 1:26 pm
(October 5, 2020 at 9:47 am)onlinebiker Wrote: Only thing I cast is ingots and bullets.
I cast the ingots out of bullets I clean out of my backstop. Then I cast the bullets out of the ingots.
Lather, rinse, repeat.....
Casting lead requires a fair bit of btu's. Aluminum or brass are far more - and iron is big time...
What would you use for a heat source?
I use coal for ingots and electric for bullets...
Looking hard at either anthracite or coke. Either one, in a forge with the right air flow, should get me enough BTUs for anything up to and including stainless steel.
Boru
‘I can’t be having with this.’ - Esmeralda Weatherwax
