Religious people get very little reps, it's xenophobia and religionism.

[Ranjr]

READ THIS IF NOTHING ELSE: again ive said this like 3 or 4 times now. you maybe describing the grid power arrangement as it typically is provided. what you fail to understand, what you are oblivious to is power off grid is supplied and consumed in different rates/configurations. while your judgement may have been fair if i were hard wired into a building permanently, but i am not. the system and all the power and management system is self contained to the truck. a self contained system using similar parts to the ones i left links to that produce manipulate and uses 220vac 3 phase. while at the same time taking availed line voltage at three phase, boosting it up or bring it down enough to charge batteries and run the unit at the same time.

Of course I'm describing nominal voltage specified by standards.  Why wouldn't I?  Why wouldn't you?  Because you made it all up, just like the lie about teaching engineers.  Certainly, what we measure at a terminal will vary due to loads.  But that's not what we design systems and equipment around.  Also, nominal 3 phase delta connected voltage is 230 not 220, which is the line to line single phase voltage that runs a household dryer or residential condensing unit.

You still refuse to answer the question because you are full of shit.  Here's a fourth chance:  What was innovative about the system that made it patentable?

[Drich]

[no one]

Who did the research for you, you dimwitted fool?

[Drich]

important note. zanotti (the refrigeration system) nor the power management system is available anymore in the us. my understanding these companies have since been bought out that the tech i produced has been intergraded into some other companies system. meaning this is not an advertisement as nothing being discussed is for sale or is available. after 2015 i believe

---

Who did the research for you, you dimwitted fool?

just me.. and yo mama

for reelz yo.. this is one of the things that is proof of God for me.. I know i can do a great many things based on knowledge and experience. this however was far above and beyond me. again just like i did at school, i listened to the engineers and electrically drew out a universal diagram of the problems they were having. (why the power needs were not being met and the power requirement for this application.) then stuff came to me in my mind from an outside source, one piece at a time. 

So i had the battery guys drawings on one side and the refrigeration requirements on the other side, and then drew in the components needed one at a time and electrically connected everything while everyone was discussing where to go to lunch. i passed my drawing to the battery guys and asked would this work for them... and then to the refrigeration guys and asked if it would work.. both said yes but were upset with scraping everything they had been doing the last few months. they said it would take 6 months to test and put together a prototype of what i drew out.. 

what's more i knew that a local surplus store had everything i needed so i told them i could have a working prototype by monday (it was a friday) for 200.00 (using 1980s and 1990s governement junk parts)

[The Grand Nudger]

Yet another miracle, clear evidence of the abrahamic god, just like all of those found car keys.

[The Architect Of Fate]

Yes god won't beam the cure for cancer into the heads of doctors. But he will help Derptch make domestic electronics 

[Ranjr]

[The Grand Nudger]

Coolbots ftw.

[Drich]

[Angrboda]

There is no advantage to using 220 VAC 3P  over 230.  The equipment would pull 4% more current while consuming the same amount of power. You're dancing around like a fool trying to cover a stupid mistake all while avoiding the simple question that you most certainly have not answered.  The answer doesn't require links, especially ones that provide no specs, or are sales brochures.  The answer comes from the first paragraph of the patent application.  Just link to that. 

That's all I want to know.  I don't care about the workplace drama or your Rainman episode while pretending to read schematics.  You want to make this a pissing contest so you could avoid the fact that you were just a refrigeration tech, not the inventor.  I don't care if you don't believe I'm a controls and instrumentation expert.  That I have a M.S.E.E.  You're a delusional fool.  You believe all kinds falsehoods, especially the ones you tell yourself. 

Two years ago, we received a grant to make a cold room from an old shipping container.  All we did was insulate it, install a window unit, modify it's internal temp sensor, toggle it on and off from a homespun controller, and power it with solar and batteries.  No genius required.  Pretty routing stuff and simple to explain.  We gave the container to a food co-op in a rural county.  That's the conversation I was hoping for.  Not your foolish mania and silly rants.

dear dummy.. because if you can not accept 220vac 3p exists, or do not still know why i used 220vac 3ph then sweetheart how are you going to wrap your mind around the power solution i created? Do you not understand if i am wasting time here with something i proved with many many brochures and links that all say this stuff exists on the market today.. that you are far too incompetent to understand what i did in what you think is an imaginary world.

let alone the industry specific refrigeration mods i made to optimise and sell this project

Can you not quote the patent you hold? What's the problem?