Our server costs ~$56 per month to run. Please consider donating or becoming a Patron to help keep the site running. Help us gain new members by following us on Twitter and liking our page on Facebook!
Current time: March 29, 2024, 8:52 am

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Home Elevator
#61
RE: Home Elevator
I recently put my signature of approval on the latest shop drawings of my home elevator and sent them to the company office. My unit is now in the queue at the factory and should be finished and ready for shipping in a couple of weeks.  Great
"The world is my country; all of humanity are my brethren; and to do good deeds is my religion." (Thomas Paine)
Reply
#62
RE: Home Elevator
(July 3, 2019 at 6:51 pm)Gwaithmir Wrote: Update: Final measurements of the stairwell were taken today. It will take a month to fabricate the elevator shaft, but it will probably take another month for all the paperwork and shipping.  Swear

With a little luck, installation will take place shortly after Labor Day.

Pneumatic?

That surprises me. 

Straight gearing or cables would be much more economical. What's the advantage?
Reply
#63
RE: Home Elevator
(August 5, 2019 at 10:07 am)onlinebiker Wrote:
(July 3, 2019 at 6:51 pm)Gwaithmir Wrote: Update: Final measurements of the stairwell were taken today. It will take a month to fabricate the elevator shaft, but it will probably take another month for all the paperwork and shipping.  Swear

With a little luck, installation will take place shortly after Labor Day.

Pneumatic?

That surprises me. 

Straight gearing or cables would be much more economical. What's the advantage?

My home's central stairwell is too narrow for a conventional elevator. This pneumatic model is a bit more expensive than a conventional unit, but it's the right diameter for the stairwell, does not require a machine room, or a pit to be dug in the cellar floor.
"The world is my country; all of humanity are my brethren; and to do good deeds is my religion." (Thomas Paine)
Reply
#64
RE: Home Elevator
(August 5, 2019 at 8:11 pm)Gwaithmir Wrote:
(August 5, 2019 at 10:07 am)onlinebiker Wrote: Pneumatic?

That surprises me. 

Straight gearing or cables would be much more economical. What's the advantage?

My home's central stairwell is too narrow for a conventional elevator. This pneumatic model is a bit more expensive than a conventional unit, but it's the right diameter for the stairwell, does not require a machine room, or a pit to be dug in the cellar floor.

Makes sense. Plastic tube?
Reply
#65
RE: Home Elevator
(August 6, 2019 at 7:30 am)onlinebiker Wrote:
(August 5, 2019 at 8:11 pm)Gwaithmir Wrote: My home's central stairwell is too narrow for a conventional elevator. This pneumatic model is a bit more expensive than a conventional unit, but it's the right diameter for the stairwell, does not require a machine room, or a pit to be dug in the cellar floor.

Makes sense. Plastic tube?

The tube is made from a high impact Plexiglas.
"The world is my country; all of humanity are my brethren; and to do good deeds is my religion." (Thomas Paine)
Reply
#66
RE: Home Elevator
(August 6, 2019 at 8:36 am)Gwaithmir Wrote:
(August 6, 2019 at 7:30 am)onlinebiker Wrote: Makes sense. Plastic tube?

The tube is made from a high impact Plexiglas.

From experience - use ONLY microfiber towels for cleaning it. Anything else will scratch it.

I built my hunthing blind in 2006 - with plexiglass windows. I have a fogging problem on cold mornings - requiring repeated wiping. I knew most cloth will scratch plexi.

I finally replaced the windows this year - as the UV in s unlight causes plexi to get brittle. But, the optical quality was still good - as I used only clean microfibre towels.
Reply
#67
RE: Home Elevator
My carpenter has been working here for the past couple of days. He's presently flooring over the top of the central stairway and installing the framework for the vestibule in the attic. He's also installing temporary beams which will be used to hoist the sections of the elevator shaft into place. The project is moving forward on schedule.
"The world is my country; all of humanity are my brethren; and to do good deeds is my religion." (Thomas Paine)
Reply
#68
RE: Home Elevator
Okay, so nothing has gone wrong ... yet.
Reply
#69
RE: Home Elevator
Just about all of the preliminary carpentry work has been completed. I still have no word of an installation date. My carpenter is here today and he's removing a section of the cellar floor to pour a level concrete pad for the elevator tube.
"The world is my country; all of humanity are my brethren; and to do good deeds is my religion." (Thomas Paine)
Reply
#70
RE: Home Elevator
The world wonders!
Reply



Possibly Related Threads...
Thread Author Replies Views Last Post
  Do you see yourself in a nursing home some day? Foxaèr 20 509 March 11, 2024 at 10:42 am
Last Post: brewer
  So I banned myself from my home/regular/old forum Duty 5 744 December 24, 2019 at 4:08 pm
Last Post: Gawdzilla Sama



Users browsing this thread: 1 Guest(s)